June 2015—15
P R O D U C T N E W S
Edited by Stephanie Hendrixson | shendrixson@mmsonline.com
Handling all your grinding needs...
the Smallest and the Largest.
KAPP Technologies
2870 Wilderness Place Boulder, CO 80301
Phone: (303) 447-1130 Fax: (303) 447-1131 www.kapp-niles.com info-usa@kapp-niles.com
GENERATING Grinding 8mm - 1,250mm PROFILE Grinding 8mm - 8,000mm
Oil Enables High-Performance Cutting
Oelheld's DiaMill HEF 1100 is a high-performance cutting
oil suitable for use as an alternative to water-soluble
cooling lubricants for turning, milling, drilling, hobbing
and cutting operations in CNC machining centers. The
oil is designed for use with high-alloy steel, cast iron and
nonferrous metals, and can be used for automotive and
gear manufacturing applications.
According to the company, the oil has nearly no odor,
offers high shearing stability, is resistant to aging, and is
physiologically safe with no aromatic content. The product
does not contain chlorine or any heavy metals, and has a
low tendency toward vaporization and misting for better
safety during use.
The DiaMill HEF 110 cutting oil offers a viscosity/
temperature relationship said to maximize fushing
and cooling properties over a wide temperature range.
According to Oelheld, the product is not aggressive
toward varnishes and elastomers and offers a high
fashpoint greater than 302°F (150°C), even with low
viscosity. High-performance additives in combination with
interfacial active substances enable high cutting speeds
and quality surface fnishes. In addition, the oil prevents the
formation of a built-up cutting edge, increasing tool life.
Oelheld U.S. Inc. | 847-531-8501 | oelheld.com